New high-speed winch machine, wire binding machine use: the company is a well-known high-speed winch (wire) machine professional manufacturers in the industry, after many years of development and production, has formed a full range of mature models to meet the different professional needs of all kinds of customers, this series of models are exquisite design, mature process, reasonable structure, stable operation, good quality, energy saving and high efficiency, well received by all kinds of customers, It can be widely used in all kinds of soft / hard conductor wires (copper wire, lacquer wire, tin-plated wire, copper-coated steel, copper-coated aluminum, etc.) and electronic wire, such as power cord, telephone cable, audio wire, video cable, automobile wire, network line and so on. .

Technical characteristics

1. The maximum speed of the spindle is 3000 rpm. 2. Automatic tension control: when the wire is twisted, when the wire is received from the bottom of the disk, the tension of the receiving line needs to be continuously increased. This function automatically tracks and adjusts the tension of the wire; the tension of the whole wire is uniform and consistent, and the tension of the machine can be adjusted without stopping. 3. The main engine is lubricated with oil and cooled by natural circulation, which effectively prolongs the service life of the spindle bearing. The wire crossing system adopts a new structure, and the wire passes directly from the spindle guide wheel to the bow belt, which subtracts the scraping and stock jump caused by the failure of the angle guide wheel on the aluminum disk. 4. Three compression devices are installed in the machine to ensure that the conductor is hanged. Roundness to reduce the loss of insulation materials. 5. The whole machine adopts synchronous belt transmission, no lubrication point in the machine, keeps the machine clean, the winch is free of oil pollution, and adapts to the conductor of all kinds of wires with high surface cleanliness requirements. 6. adjusting the winch only needs to replace one lead wheel, adjust the winch only needs to pull the reversing rod, easy to operate, so as to reduce the error rate and working intensity of the operator. The bearings of the whole machine are made of famous Japanese brands, the bow belt is made of new materials, flexible, and the stock jump caused by vibration, frequency converter, PLC, magnetic powder clutch, electromagnetic brake, hydraulic Jack and so on are all used in the high speed operation of stock jump, frequency converter, magnetic particle clutch, electromagnetic brake, hydraulic Jack and so on. Brand, reduce failure rate and maintenance cost.